INDIA'S 1st ASME BPE CERTIFIED TUBES AND FITTINGS MANUFACTURER

MTR

  • PHARMA & BIOPHARMACEUTICALS

PHARMA FITTINGS & PHARMA PIPES/TUBES | SANITARY TUBE FITTINGS | STAINLESS STEEL EP TUBES FOR STERILE APPLICATIONS
  • PURIFIED WATER
  • WFI
  • CLEAN STEAM
  • PROCESS
  • CIP / SIP
  • CLEAN UTILITIES

Ensuring sterility and retardation of bio-film formation is critical to the Pharma and Bio-pharmaceuticals. Our high quality tubes ensure this and more.
Pharma pipes, Pharma Pipes Manufacturers, Pharma Fittings,Stainless Steel EP Fittings,EP Tubes, EP Tubes Manufacturers, EP Fittings, Sanitary Tubes

Ensuring sterility and retardation of bio-film formation is critical to the Pharma and Bio-pharmaceuticals. Our high quality tubes ensure this and more.

High quality surface finish, controlled sulphur and 100% traceability of Pharma Fittings, Pharma Pipes, PharmaTubes, Sanitary Tube Fittings, Stainless Steel EP Tubes. Our manufacturing facility is certified with

ISO 9000-2008 and 3-A sanitary certification from USA in Pharma Fittings, Pharma Pipes, PharmaTubes, Sanitary Tube Fittings, Stainless Steel EP Tubes . Every batch of PharmaTubes, Sanitary Tube Fittings & Stainless Steel EP Tubes tubes passes through a spectrum of 14 tests, that are both destructive and non-destructive types. Though a robust quality culture ensures we uphold our customers’ trust on our products, we continue to build and strengthen a culture of compliance & assurance, where every employee is trained to be vigilant and dedicated to the very highest standards of quality expected.

For the pharmaceuticals and biopharmaceuticals, we offer tubes that are:

  • ASTM A 270 S2 compliant
  • Mechanically polished surface finish from SF1-SF3
  • As per ASME-BPE specifications
  • Complete traceability to raw material
  • Controlled sulphur, low ferrite (EN 1.4404 / EN 1.4435)
  • Raw material sourced from Reputed Mills.
  • Electropolished surface finish SF4- SF6
  • Over 14 destructive and non-destructive quality tests

  • Buying in India? Six Reasons for Consideration

Manufacturing infrastructure, Experience, Global standards and certifications, environmental concerns and stringing quality controls make us who we are;
  • PAY IN INR

    Eliminate cost escalations due to the forex
    fluctuations and banking formalities. Save on
    Bank charges, forex, agent commission etc.

  • ORDER SMALL QUANTITIES

    No need to order in bulk. Save on inventory and
    handling costs as you order as much as you
    require.

  • SHORTER LEAD TIMES

    A fully automated line and ex-stock inventory
    enables us to deliver tubes shorter lead times.

     

     

     

  • ASSURED TIMELY DELIVERY

    Eliminate custom clearance or shipping delays. You get the
    tubes when and where you want it delivered to your door steps.

  • EP 6.1 MTRS TUBES

    We ship 6.1 Mtrs EP tubes whereas locally NON – EP imported tubes
    are electropolished in 3 mtrs length. Savings on transportation cost
    accrued due EP transportation.

  • FACTORY ACCEPTANCE TEST

    FAT can be conducted before taking delivery.
    Not possible when you import. The cost of tube
    replacement, delivery issues are eliminated for
    good.

Grade & Surface Finish
ApplicationGradeSurface FinishFinish Value
Ra (μm)
  IDODIDOD
Soft water304 L / 1.4307 / 316L / 1.4404MP/EPMP< 0.5/0.38< 0.8
Potable water/ Purified water / WFI/ Pure steam/ SIP316L / 1.4404EPMP0.38< 0.8
CIP316L / 1.4404MPMP< 0.5< 0.8
Process chemical316L / 1.4404BA/MP/EPMP< 0.8/0.5/0.38< 0.8
Compressed air / GAS304 L / 1.4307 316L / 1.4404BAMP< 0.8< 0.8
NOTE:
[1] 316L / 1.4404 is used when ozone is used in disinfection system
[2] 304L / 1.4307 is resistant to crevice and pitting type corrosion when chloride concentration is up to 500 mg/l with free chlorine concentration up to 5 mg/l
at room temperature. If temp >50 ⁰C then use 316L/1.4404
[3] 316L / 1.4404 is used when chloride concentration is above 500 mg/l - 2000 mg/l with free chlorine concentration upto 5 mg/l.
[4] 316L / 1.4404 is used when temperature is >50 ⁰C.

HEAD OFFICE

609, Sanket Heights,
Sun Pharma Road,
Vadodara – 390 020.
Gujarat, INDIA.

Telephone : +91 8347 000 368
WhatsApp : +91 8347 000 368
Email : marketing@rensatubes.com

MANUFACTURING UNIT

Plot No. 13 & 14
Jhagadia G.I.D.C.,
Bharuch – 393 110.
Gujarat, INDIA.

WhatsApp : +91 8347 000 368

PRODUCTS

INDUSTRIES

Copyright ©2023 Rensa. All Rights Reserved

Powered & Designed by Kalpvriksh Digital Technology